An empty boardroom whose screen shows accounting process flows with control checkpoints

ServiceAudit & Assurance

Internal audit

Independent assurance that your controls work in practice, reported in a form your board and audit committee can act on.

Internal audit gives management and those charged with governance an independent view of whether the business's processes and controls are working as intended. The work covers a risk-based internal audit plan, audits of individual processes and locations, testing of internal financial controls under the Companies Act, 2013, ICFR and J-SOX testing for Indian subsidiaries of foreign groups, physical verification of inventory and fixed assets, and reporting to the audit committee or board. Each engagement is planned and performed with reference to the Standards on Internal Audit issued by the ICAI, and findings are agreed with process owners before they are reported.

Service overview.

Controls usually exist on paper. There is an approval matrix, a purchase policy and a month-end checklist. The question management and the board need answered is different: are these controls actually followed, at every location and every month, and would they catch an error or a misuse before it reached the accounts? Without independent testing, the first answer often comes from the statutory auditor's observations, a stock shortage found at the year-end or a vendor payment that should not have been made.

For many companies the requirement is also statutory. Section 138 of the Companies Act, 2013 requires prescribed classes of companies to appoint an internal auditor, and the audit committee or board decides the scope, frequency and method of internal audit. Directors of listed companies state in the directors' responsibility statement under section 134(5)(e) that internal financial controls have been laid down and are adequate and operating effectively, and the board's report of every company comments on the adequacy of internal financial controls with reference to the financial statements. The statutory auditor, under section 143(3)(i), reports on internal financial controls with reference to financial statements, except where a company is exempted by notification.

Indian subsidiaries of foreign groups often carry a further requirement. A Japanese parent reporting under J-SOX, or a group following another ICFR framework, expects the Indian entity to document its controls, test them on the parent's calendar and report deficiencies in the parent's format, while also meeting Indian requirements for the statutory auditor.

Internal audit brings these needs together: a plan that focuses on the areas of highest risk, testing that produces evidence the board and auditors can rely on, and reports that lead to agreed actions rather than a list of observations.

  • 06Areas of assistance
  • 08Process stages
  • 07Key deliverables
  • 10Sectors served

Business challenges.

  • Controls that exist only on paper

    Policies and approval matrices are in place, but transactions are processed outside them when work is urgent. Without testing, management cannot tell how often controls are bypassed or whether the bypasses matter.

  • Audit plans that do not follow risk

    Internal audit covers the same areas every year in the same way, while new locations, products, systems or vendors carry the larger risks. Effort is spread evenly rather than directed where errors and losses are most likely.

  • Weak evidence for IFC reporting

    Directors and auditors need to rely on internal financial controls, but process documentation, risk and control matrices and test records are incomplete. Testing is done late in the year, leaving little time to remediate deficiencies before the reporting date.

  • Two control frameworks to satisfy

    Subsidiaries of foreign groups must meet the parent's J-SOX or ICFR requirements and Indian requirements at the same time. Without coordination, controls are documented twice, tested on different calendars and reported in formats that do not agree.

  • Differences in inventory and assets

    Book stock does not agree with the physical count, stock at third-party locations is not confirmed and the fixed asset register cannot be traced to the assets on the floor. Differences are written off at the year-end without explanation of their cause.

  • Reports that do not lead to action

    Observations are reported without root causes, owners or dates, and the same issues recur in the next cycle. The audit committee receives long reports but cannot see which matters are significant or whether earlier actions were completed.

Our approach.

  1. 01

    Understanding the business

    Discussions with management and the audit committee on objectives, structure, systems, earlier audit findings and areas of concern.

  2. 02

    Risk assessment and planning

    Rating of processes and locations by risk, and preparation of an audit plan for approval by the audit committee or board.

  3. 03

    Engagement planning

    Scope, objectives, sample sizes, data requirements and timelines for each audit agreed with process owners.

  4. 04

    Walkthroughs and documentation

    Process walkthroughs, review of policies and authority limits, and confirmation of the controls in place.

  5. 05

    Testing

    Sample-based and data-based testing of transactions and controls, with evidence retained in working papers.

  6. 06

    Discussion of findings

    Facts, root causes and corrective actions agreed with process owners before reporting.

  7. 07

    Reporting

    Reports to management and summaries to the audit committee or board, rated by significance.

  8. 08

    Follow-up

    Periodic review of agreed actions and re-testing of remediated controls.

How the firm works with you

  • Risk directs the work

    Audit effort is concentrated on the processes and locations where errors and losses are most likely, and the plan changes when the business changes.

  • Evidence before opinion

    Every finding rests on documented evidence and is confirmed with the process owner before it is reported.

  • Root causes, not symptoms

    Findings explain why a control failed, so that the corrective action prevents the issue from recurring rather than correcting a single transaction.

  • Independence respected

    The firm considers independence before accepting work and does not provide internal audit to a company where it is the statutory auditor, as section 144 of the Companies Act, 2013 prohibits.

  • One set of controls

    Documentation is designed to serve internal financial controls, the statutory auditor and any group framework together, avoiding duplicate work.

  • Clear reporting

    Reports are short, ranked by significance and written so that the audit committee can see what matters and what has been done.

Scope & deliverables.

Each part of the service can be engaged on its own or together, depending on what the business needs.

  1. 01Risk-based internal audit plan

    An internal audit plan should reflect where the business is most exposed.

    More detailLess detail

    The firm begins with the company's objectives, structure, processes, locations and systems, and with any previous audit findings, to build a risk assessment that rates each area by likelihood and effect. The plan then sets out which processes and locations will be audited, when, to what depth and with what resources, over a year or a longer cycle.

    The plan is discussed with management and presented to the audit committee or board for approval, as section 138 leaves the scope and frequency of internal audit to them. It is revisited during the year when the business changes.

    What you can expect: a documented risk assessment, an approved audit plan with a calendar, and a clear link between each audit and the risk it addresses.

  2. 02Process and location audits

    Process audits examine whether a cycle runs as designed and whether its controls work.

    More detailLess detail

    Typical areas are procure-to-pay, order-to-cash, inventory and production, payroll, treasury and banking, fixed assets, statutory compliance and the financial close. Location audits look at a plant, branch, depot or warehouse as a whole.

    The work involves walkthroughs with process owners, sample testing of transactions against policy and authority limits, review of master data changes and exception reports, and analysis of complete transaction data where systems allow. Each finding is discussed with the process owner to confirm the facts and agree a root cause and corrective action.

    What you can expect: findings supported by evidence and agreed with management, rated by significance, with root causes, owners and target dates.

  3. 03Internal financial controls under the Companies Act, 2013

    Internal financial controls are the policies and procedures a company adopts to ensure the orderly and efficient conduct of its business, including adherence to policies, safeguarding of assets, prevention and detection of frauds and errors, accuracy and completeness of the accounting records and timely preparation of reliable financial information.

    More detailLess detail

    This is the description given in the explanation to section 134(5)(e).

    The firm assists management in documenting processes, preparing risk and control matrices, assessing the design of key controls including segregation of duties and IT general controls, and testing operating effectiveness during the year. Deficiencies are evaluated for significance and remediation is tracked before the year-end. The work follows the ICAI Guidance Note on Audit of Internal Financial Controls over Financial Reporting where relevant, so that the documentation is usable by the statutory auditor.

    The statutory auditor forms its own opinion under section 143(3)(i). The firm's work supports management's responsibility; it does not replace the auditor's.

    What you can expect: process documentation and risk and control matrices, test records for each key control, and a deficiency register with remediation status for management and the audit committee.

  4. 04ICFR and J-SOX testing for subsidiaries of foreign groups

    Indian subsidiaries of Japanese groups support their parent's reporting on internal control under the J-SOX framework, and subsidiaries of other groups follow comparable ICFR programmes.

    More detailLess detail

    The parent usually defines the scope, the control set, the testing calendar and the reporting templates.

    The firm works with the subsidiary's management and the parent's internal audit or J-SOX team to scope significant accounts and processes, update documentation, perform walkthroughs and sample-based testing of entity-level, process-level and IT general controls, and report results in the parent's format. Where possible, the same documentation is used to support internal financial controls reporting in India, so that controls are not documented twice.

    What you can expect: testing timed to the parent's calendar, documentation in the parent's format, and a single set of controls that serves both the group and Indian requirements.

  5. 05Inventory and fixed-asset verification

    Physical verification confirms that assets recorded in the books exist and are in the condition recorded.

    More detailLess detail

    For inventory, the firm can plan and observe or conduct counts at plants, warehouses and depots, reconcile counts with book stock, identify slow-moving, damaged and expired items, and confirm stock held with job workers, consignees or third-party warehouses. For fixed assets, the work involves tagging, physical verification against the register, identification of idle or missing assets and reconciliation with the general ledger.

    Differences are investigated with stores and accounts staff to identify causes, whether cut-off, recording errors, process weaknesses or losses, and the results support management's reporting and the matters the statutory auditor considers under CARO 2020.

    What you can expect: count and verification reports, reconciliations with the books, explained differences and recommendations to prevent recurrence.

  6. 06Reporting to the audit committee and board

    Internal audit is only as useful as the actions it leads to.

    More detailLess detail

    The firm reports each audit to management with agreed responses, and prepares a summary for the audit committee or board covering significant findings, their root causes, the status of earlier actions and any matters needing a decision. Section 177 of the Companies Act, 2013 includes evaluation of internal financial controls and risk management systems among the audit committee's functions, and the report is structured to support that review.

    Partners can attend audit committee or board meetings where requested, and follow up open actions at agreed intervals.

    What you can expect: concise reports ranked by significance, an action tracker that shows what has been closed and what is overdue, and direct discussion with the committee.

Key deliverables

  • Risk assessment and audit plan

    A rated risk universe and an approved internal audit calendar.

  • Internal audit reports

    Findings with evidence, significance ratings, root causes, owners and dates.

  • Audit committee summary

    A concise view of significant matters and the status of agreed actions.

  • Risk and control matrices

    Process documentation and key controls for internal financial controls reporting.

  • Control test documentation

    Test procedures, samples and results, including J-SOX or ICFR templates where required.

  • Deficiency and action tracker

    Open issues, remediation progress and re-testing results.

  • Verification reports

    Inventory and fixed asset counts reconciled with the books, with differences explained.

Value & outcomes.

Who can benefit, and how

Companies required to appoint an internal auditor
Need an internal audit function that meets section 138 and gives the audit committee or board a reliable view of controls.
Listed and larger unlisted companies
Need evidence supporting internal financial controls reporting by directors and the statutory auditor.
Subsidiaries of foreign groups
Need ICFR or J-SOX testing on the parent's calendar alongside Indian requirements.
Multi-location manufacturers and distributors
Need regular testing of plants, depots and branches and verification of inventory held across locations.
Promoter-led businesses preparing for growth
Want independent assurance on controls before raising capital, adding locations or reducing day-to-day involvement.
Non-profit organisations
Need assurance on fund utilisation, procurement and donor reporting.

Practical applications

These scenarios are illustrative. They describe common situations and are not accounts of particular clients or assignments.

  • Illustrative scenario 01

    A pharmaceutical company with distributed stock

    A formulations company holds stock at its plant, at carrying and forwarding agents and with distributors. Near-expiry stock is high and the book stock at agents is rarely confirmed. The internal audit plan includes quarterly verification at selected locations, reconciliation of agent stock, review of returns and expiry provisions, and a report to the audit committee on the results.

  • Illustrative scenario 02

    An engineering subsidiary reporting under J-SOX

    The Indian unit of a Japanese group must complete J-SOX testing for its parent while meeting Indian internal financial controls requirements. The work covers updating risk and control matrices, interim and year-end testing on the parent's calendar, reporting in the parent's format and using the same evidence for the statutory auditor in India.

  • Illustrative scenario 03

    A real estate developer reviewing contractor payments

    A developer with several projects pays contractors on running bills certified at site. Management wants assurance that payments match measured work and contract rates. A process audit tests bills against measurement records, contract terms and approvals, reviews advances and retention, and reports on the control gaps found.

  • Illustrative scenario 04

    A non-profit strengthening grant controls

    A trust receiving funds from several donors must show that each grant is spent for its stated purpose. Internal audit reviews fund-wise accounting, approval of expenditure, procurement for programmes and reporting to donors, and recommends controls that make utilisation easier to demonstrate.

Frequently asked questions

Questions, answered plainly.

Is my company required to appoint an internal auditor?

Section 138 of the Companies Act, 2013 and the related rules require prescribed classes of companies to appoint an internal auditor, based on factors such as listing status, turnover, paid-up capital, borrowings and deposits. The criteria have been amended over time, so applicability should be checked against the current rules for the company's latest figures. The firm can review this with you.

Can our statutory auditor also be our internal auditor?

No. Section 144 of the Companies Act, 2013 does not permit a company's statutory auditor to provide internal audit services to that company. The internal auditor must be a separate person or firm, or the company's own employee where the rules allow.

What standards does the firm follow?

Internal audit engagements are performed with reference to the Standards on Internal Audit issued by the ICAI, together with the ICAI Guidance Note on Audit of Internal Financial Controls over Financial Reporting where internal financial controls are in scope. For group reporting, the parent's framework and templates are also followed.

How often should internal audit be carried out?

The law leaves frequency to the audit committee or board. Many companies audit higher-risk areas quarterly and others annually or over a rotation. The plan sets this out based on the risk assessment.

Is internal audit the same as internal financial controls testing?

They overlap but are not the same. Internal financial controls testing focuses on controls over financial reporting and related areas; internal audit can also cover operations, compliance and efficiency. The firm can combine both in one plan to avoid duplication.

What happens if internal audit finds a suspected fraud?

The matter is reported promptly to the appropriate level of management or the audit committee, as agreed in the engagement terms. Where a detailed examination is needed, it is normally carried out as a separate forensic accounting engagement with its own scope.

What do you need to start?

The latest financial statements, organisation chart, policies and authority matrix, previous internal and statutory audit reports, details of locations and systems, and a discussion with management and the audit committee chair.

Related information

Discuss your requirements.

Discuss your internal audit or controls requirements with the firm. A short description of the company, its locations and any reporting obligations is enough to begin.